Bushings (Pair)

Details & Specifications for Bushings (Pair)

• Sold as a pair
• Each bushing is installed on opposite sides of the arm 
  • When assembling the system, the washer part of the bushing should always face towards the taps of the table mounting plate and the leg.

The original bushings are pressed in by machine at the factory.  A new arm with bushings already installed may be purchased HERE.

Replacing bushings by hand is not the easiest task and some tools (not included) are required, such as hammer, pliers, etc.  Here are some tips:

1. Remove old bushing (may need to crack the bushing first)
2. Line up the line on the washer part of the bushing with the cut in the arm
3. With a board on top of the bushing, carefully tap the board to install the bushing, making sure that the bushing is going in straight.  This will be a snug fit and the outer edge of the bushings may shred a bit.

CAUTION!!  The "Original Lagun" is NOT sold on Amazon.  Similar items sold on Amazon are poor quality, painted Chinese knockoffs that do not function well and are NOT compatible with "Original Lagun" parts.