Measurements, Clearances & Specs

*Please Note: All measurements are approximations.  We recommend waiting to drill holes until you have product in hand*

 

ARM: One Option Available

 

TMP: 2 Options Available: Standard or Folding

*Folding TMP available as a part only as we have a limited supply available.  For this reason, it not currently offered as an option with a system.  If you would like to substitute the Folding TMP for the Standard TMP with your system, please email us for assistance.

 

ARM TO TABLE MOUNTING PLATE (TMP) CONNECTION

 

BRACKETS: 2 Options Available: Sliver/Narrow (3 Hole) or Standard (4 Hole)

*Measurement from back of Bracket to front of Leg is same for all leg options.

 

LEG: 3 Options Available: Standard, Double-Handled or Longer (Standard Leg also available in Black)

*Leg measurements shown above include tap.

Standard Leg: Adjustment range 6" up or 6" down.  Aluminum tube 19 11/16" long.  Overall length with tap installed 21 3/4".

Double Handled Leg: Adjustment range 6" up or 11 1/2" down.  Aluminum tube 19 11/16" long.  Overall length with tap installed 21 3/4".

Longer Leg: Adjustment range 6" up or 6" down.  Aluminum tube 27 1/2" long.  Overall length with tap installed 29 1/2".

 

INSTALLATION CLEARANCES

A. From bottom of Leg to top of TMP.  This measurement + tabletop thickness is the total overall height of system.

B. From bottom of Leg to top of Arm.

C. From bottom of Leg to bottom of Arm.  This measurement would be the height required to swivel the Arm over an object. 

D. From side of Standard Bracket to edge of Leg handle.  Sliver Bracket would be hidden behind Leg = Measurement E.

E. From side of Leg to edge of handle.

F. Arm overhangs Leg 7/8" at connection point.  If mounting flush to vertical surface, Bracket must be shimmed out at least 1" to allow enough clearance for Arm to swivel / pivot.

G. Length of Arm overall.  Center to center bushings (pivot points) = 12 3/4".

H. From bottom of Arm to top of TMP.  This measurement + tabletop thickness would be the amount of space needed to store tabletop when not in use.

   

*Photo above on LEFT includes Standard Table Mounting Plate (TMP).

*Photo above on RIGHT includes Folding Table Mounting Plate (TMP).

*Standard Bracket is shown.