Skip to Content

Free shipping on orders $189 or higher in the contiguous United States

Close Icon

Things to consider before installing a Lagun Table Leg System

  • Text Size
  • Minus off icon
  • Plus off icon


- There isn’t one specific Lagun Table Leg system for every scenario or each model of RV/Van.  

- Bracket placement is the most important decision.  The system is only as stable as the Bracket installation.)

- The stability of the vertical surface selected has a direct effect on the overall stability of the entire table leg system.  A piece of paneling would not suffice.  We recommend a minimum of 5/8" wall thickness.

- The distance from the floor/ground to where the Bracket is installed will affect the overall height of the system.

- If mounting the bracket flush to the vertical surface, you will need to shim the Bracket out at least 1” to allow the Arm to swivel.  There is 7/8” overlap at the Arm & Leg connection point.  If you do not shim the Bracket out from the wall, there will not be enough clearance for the Arm to swivel.


How do I install my Lagun Table Leg?

Answer:  Please see User Guide & Installation Instructions Document.

Can I customize my Lagun Table Leg system?

Answer: We do not have the ability to customize the Lagun Table Leg System beyond our current options offered on our website.  We also do not have any other variations of any of the accessories listed on our website.

Should you choose to modify any part of the Lagun Table Leg System or its installation, it will void your warranty.  The Lagun Table Leg System parts are NOT compatible/interchangeable with any other brands.

What are the Board and Wedges for?

Answer: These are optional installation items.  The board may be useful to reinforce the vertical surface.  The wedges may be useful to level the vertical surface.  Please note:  These are currently only available in one size, which aligns with the Standard Bracket.

Where should I install the Lagun Table Leg System?

Answer: Placement of the bracket is very important as the Lagun Table Leg System requires a solid foundation. The bracket must be installed on a solid vertical surface. Attaching it to only a piece of paneling or fiberglass is not adequate.  There isn’t one specific Lagun Table Leg system for every scenario or each model of RV/Van.  We are not able to recommend bracket placement or which system would work best for your application, as we do not know structure & reinforcement areas in every van/RV. 

Can I use the Lagun Table Leg system in more than one location?

Answer: Yes. Additional brackets can be purchased on the Accessories Page to be able to move your Lagun to another location.  

By installing an additional bracket on the outside of your camper, in your boat or at the end of your countertop, you can utilize the system in multiple locations.

Can I mount the Original Lagun system on the floor?

Answer: No, the bracket must be installed on a solid vertical surface.  We do NOT offer a floor adapter option.

The Lagun Table Leg System is NOT compatible with the round tube style table leg, as the system is only as strong as the bracket installation.

What if I need longer bolts?

Answer: We do not offer any other size of bolts besides the ones included with the system. The ones included are 2" in length (8 mm or 5/16" equivalent).  If you need a different bolt length, you may need to replace the nuts as well.

Another option is to use #18 Tapered Lag Screws (instead of included bolts).

NOTE: Make sure the screws/bolts used are recessed into the bracket so they do not stick out and get caught on leg handle.

Can the Lagun tabletop fold down?

Answer: This depends on which Table Mounting Plate (TMP) you have.

With the Standard Table Mounting Plate (TMP) - No, there are no hinges to allow that to happen. However, you can easily disassemble the pieces. This allows you to store the entire (except for the installed bracket) Lagun Table Leg System under the table top.

With the Folding Table Mounting Plate (TMP) - Yes.  We have a limited supply available.  For this reason, it is currently offered as a PART ONLY - not as an option with a system.  If you would like to substitute the Folding TMP for the Standard TMP with your system, please email us for assistance.

What is the dovetail channel on the Table Mounting Plate (TMP) for?

Answer: This channel is used to store the leg when the system is disassembled.

What size tabletop is recommended for Lagun?

  • Tabletops are NOT INCLUDED with systems.
  • System with Standard TMP can support up to 50 lbs.  System with Folding TMP can support up to 40 lbs.  This includes the weight of the tabletop plus anything placed on it.
  • System with Standard TMP can support a tabletop up to 30" x 40".  System with Folding TMP can support a tabletop up to 24" x 36".
  • The table mounting plate should be as centered as possible.
  • Minimum thickness: 5/8"
  • Use #8 pan headed screws (NOT INCLUDED) to install to the tabletop.  Screws must be installed at least 1/2 the depth of the tabletop for stability reason, using caution so they don’t protrude through the tabletop.
  • CAUTION: Leaning or excessive pushing on the tabletop can damage parts of the Lagun Table Leg.

Will I be able to convert a Lagun dinette into a bed?

Answer: Yes!

  • Loosen the handle on the leg & remove the Lagun Table Leg from the permanently installed bracket
  • Flip your table top onto a protected flat surface
  • Loosen the handle that links the arm & leg
  • Remove the leg from the arm
  • Slide the leg onto the table mounting plate to store under your table top
  • Make sure all handles are secured & positioned appropriately